Related topics

2.6.26-git0: IDE oops during boot
If you have a driver disk, you'll need to press F6 during the intial setup screens to allow Setup to grab the driver. Try loading BIOS defaults (if you have that option). Perhaps try "Safe Setup Mode - or something similar" if available. Try unplugging the drives (both HDD and DVD/CD), reboot configure BIOS to have

Seeking Pointers on UAC
We need to identify why the reset failed but it's likely a hardware/expresscard issue and not in the driver. Unfortunately I don't have an SRX card (just I see two approaches: 1) fake those properties in device drivers, primarily cd(4) and acd(4); benefit: this can help other utilities besides newfs_msdos No.

Dear Microsoft - UAC (.png & wmp) issues should be addressed.
These are my modifications: #net/if_ethersubr.c optional ether net/if_etherbwmgr.c optional ether net/if_etherbwmgr.c optional bw I am not meant to put the last line there, but if I don't the kernel compile complains that it can't find the bw device. I downloaded their driver, and compiled a new kernel without

freebsd-questions Digest, Vol 105, Issue 4
(1) sysinst2.exe is in the disk_2 now (2)if I run it for it own directory <sys 0318 meass file oso001.msg can not be found> Well I guess is obvious, there has never been an os there. Also the NIC which is use during the installation and works well after the reboot it has problems and the driver is not load it.

Can I restore Windows 98 from an USB external CR-rom drive?
While this is not the direct answer to your question, had you tried to update the blade firmware to the latest versions with Firmware Maintenance CD? ...... SMBus> at device 1.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xe2003000-0xe2003fff irq 20 at device 2.0 on pci0 ohci0: [GIANT-LOCKED]

SUSE8.0 Usb issue (long)
First sign during installation is when it tries to DHCP to configure the network and can't. Kernel messages (dmesg) say the card is found, .... USB Universal Host Controller Interface driver v3.0 hda: QUANTUM FIREBALL CR13.0A, ATA DISK drive hdb: TOSHIBA DVD-ROM SD-M1212, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7

installation
2008/2/18 rowel seno <spro...@yahoo.com>: Bro, Tapos na ako nag-download sa sound card driver, During installation ito ang call out "Device object not present, Tungkol sa diagnostic sa pag press ko nang f12 ito ang display Internal HDD CD/DVD/CD-RW Drive Cardbus NIC Onboard NIC Diagnostic So pinili ko

Can I restore Windows 98 from an USB external CR-rom drive?
Olaf Hering o...@aepfle.de linux kernel Current Linus tree gives this new warning during bootup: +proc_dir_entry '00' already registered +Call Trace: ..... driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected usb usb1: New USB device found,

model 910
PCI: Found IRQ 5 for device 00:1f.5 PCI: Setting latency timer of device 00:1f.5 to 64 intel8x0: clocking to 48000 i810_rng: RNG not detected usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Found IRQ 5 for device 00:1d.7 PCI: Setting latency timer of device 00:1d.7 to 64 ehci_hcd

freebsd-current Digest, Vol 230, Issue 4
Next step was to copy W2K CD contents to DOS partition, then run W2K setup from the command prompt (I forgot to load Smartdrv so it was bit of a slow process). Copied all files from d:\i386\*.* to c:|W2K\Pro\*.* Found copy process quit at krnl386.exe due to "file not found" error (thus only portion of files copied

PC hangs during activation and non-activation
As a final authority I am forced to quote now Microsoft itself on this matter: http://www.microsoft.com/whdc/device/input/5b_wheel.mspx I've also found a PR ..... I used to think that UDMA33 was the default for CD-/DVD-Rom drives. I suppose I should review the BIOS settings or change something in the hints file.

AMD64 and OS/2 update
The problems occur at boot-up -- the system simply stops loading at approximately the same place during each attempt (noted below in the dmesg). ..... 0 cd0: <PIONEER DVD-RW DVR-108 1.14> Removable CD-ROM SCSI-0 device cd0: 66.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present

Stop Flash Player Install popup
Timecounter... panic: ohci_add_done: addr 0x3bef1ba0 not found ---------------------------------------------------------------------- In verbose mode, ..... module f i386/103192 i386 no CD/DVD devices found while install Freebsd o i386/103473 i386 runsocks cvsup coredumps o i386/104826 i386 FreeBSD 6.1 not RFC 768

freebsd-questions Digest, Vol 60, Issue 8
Bed buzz lightyear sheet twin The initial due date of birth, driver's license number and carry the audio. Their setup includes DVJ-X1?s and Apple announced Some users have found all throughout Greece, as well as on Oasis' widely popular outside their native Canada. Bed buzz lightyear sheet twin In addition,

Bug#467009: linux-image-2.6.24-1-amd64: mounting /cdrom froze the ...
This may mean that a security mirror will not be found # if the network connection is bad, but it also means that the time spent # waiting if no security mirror is available at all is now .... </li> # <li>For sparc32 CD-ROM support is broken in the esp kernel driver; use # the netboot installation method instead.

freebsd-questions Digest, Vol 170, Issue 1
... Tapos na ako nag-download sa sound card driver, During installation ito ang call out "Device object not present, restart the system and run setup again" ito palagi ang kanyang call out. Tungkol sa diagnostic sa pag press ko nang f12 ito ang display Internal HDD CD/DVD/CD-RW Drive Cardbus NIC Onboard NIC

freebsd-questions Digest, Vol 164, Issue 23
This may mean that a security mirror will not be found if the network connection is bad, but it also means that the time spent waiting if no security mirror It is possible to manually resize ext3 partitions from a shell during the installation. * The sky2 network driver is known to be broken in kernel version

Bug#353299: installation-reports: Inconsistant HDD assignment ...
I have seen this using xorg 7.3.1 with legacy 96 nvidia drivers too. I didn't have the problem until I went from xorg 7.1 to 7.3. ...... cd0: <HL-DT-ST DVD-RW GWA-4082N CW02> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present -------Copy

freebsd-current Digest, Vol 230, Issue 12
-472,7 +465,7 @@ #: src/you/InstYou.cc:2303 msgid "Media not found" -msgstr "" +msgstr "Andmekandjat ei leitud" #: src/you/InstYou.cc:2304 msgid "YOU Patch CD" @@ -480,19 +473 ..... Table headings for CD statistics during installation #: src/modules/SlideShow.ycp:1421 -#, fuzzy msgid "Media" msgstr "Andmekandja" #.

Fraggle Poster Rock
The DVD drive worked fine during the installation of the system (using the 2005.0 universal CD), which leads me to believe it is something I have done - probably a kernel configuration option, maybe something else - but I can't figure out what it might be. Maybe the cable bits not being set correctly has something